Turbo ™
Flat Turbulent Emitter
One of the world's most proven and trusted flat emitter, used in both surface and subsurface applications for more than 30 years worldwide.
![Turbo_1.png](https://static.wixstatic.com/media/df5c41_bd97acbaa5fa4e88b24f4876b68e4b1b~mv2.png/v1/fill/w_307,h_213,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/Turbo_1.png)
Emitter Flow Path
One of the most important elements in the design of an emitter is the flow path. Its width, depth and length determine the flow rate of the emitter in liters per hour but most importantly determines their anti-clogging ability. A highly turbulent flow design creates multiple vortexes inside the flow path and therefore prevents clogging.
Emitter Characteristics
-
Wide range of flow rates: 0,8 / 1,3 / 1,6 / 2,0 / 2,4 and 3,8 l/h (0,21 / 0,34 / 0,42 / 0,53 / 0,63 and 1,00 g/h)
-
Designed for insertion systems of wall thicknesses ranging from 5 mil up to 47 mil (0,13 mm - 1,2 mm)
-
Suitable for driplines with any diameter from 12 mm and on
-
Manufactured from the finest raw materials that provide durability and long-lasting performance
-
Highly turbulent labyrinth with large cross section design, ensure superior clogging resistance
-
Symmetrical design allows the highest insertion rates and higher production speed
-
Wide and accurate water passages along the labyrinth
-
Specially designed labyrinth creates high turbulent flow, therefore preventing clogging of the emitter
-
Ideal for single season as well as multiseason applications and subsurface installation
-
Injected molded emitters with excellent Coefficient of Variation (CV), less than 5%
-
Advanced water inlet design, increases filtering area and prevents particle insertion in the emitter, thus enhancing the anti-clogging performance